MPB TECHNOLOGIES EBS-7210 REPAIR and MPB TECHNOLOGIES EBS-7210 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the MPB TECHNOLOGIES EBS-7210. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the MPB TECHNOLOGIES EBS-7210 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Source (DFB-LD-WDM-BBS)?
Shop for Comparable Products on our  used Laser Source (DFB-LD-WDM-BBS) page or new Laser Source (DFB-LD-WDM-BBS) page

 
   MPB TECHNOLOGIES EBS-7210   Description / Specification:    
MPB TECHNOLOGIES EBS-7210 Dual-Band Broadband Source,

The MPB Communications EBS-7210 is a high-power, spectrally-flattened and remarkably stable broadband source spanning both the erbium C and L bands. Developed to be an affordable, yet powerful, laboratory test source for DWDM component manufacturers. With its broad, flattened emission spectrum and eye-safe wavelength, the EBS-7210 Dual-Band Broadband Source is well suited for a wide range of applications, such as wavelength-dependent loss and PMD measurements of DWDM-system components, gain and gain-flatness measurements of EDFAs, local networking by spectral slicing, fiber-optic sensors and white-light interferometry. Specifications. Total Output Power: >= 11 dBm. Spectral Width: >= 76 nm (at 3 dB), 100 nm typ. (at 20 dB). Ripple: <= 2.5 dB over >= 75 nm. Stability (after 30-min warm-up): <= ± 10 mdB/hr (5 mdB/hr typ.). Polarization State: Unpolarized. Optical Isolation (output): >= 42 dB over bandwidth. Output Connector: E-2000 APC. Communication: RS-232 (optional).



 

Standard Calibration $475.00 *
*This is a Web introductory price for one calibration of the MPB TECHNOLOGIES EBS-7210. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
Optical power referenced to 1 millimatt

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Refractive Index
The refractive index or index of refraction of a substance is a measure of the speed of light in that substance. It is expressed as a ratio of the speed of light in vacuum relative to that in the considered medium. The velocity at which light travels in vacuum is a physical constant, and the fastest speed at which energy or information can be transferred. However, light travels slower through any given material, or medium, that is not vacuum.

Total insertion loss
A measure of the loss of light within an optical component


Please contact us for your MPB TECHNOLOGIES EBS-7210 REPAIR and/or MPB TECHNOLOGIES EBS-7210 Dual-Band Broadband Source, CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: